Innokin Endura T18 Starter Kit

Innokin Endura T18 Starter Kit

Introducing the Innokin ENDURA T18 Starter Kit which is perfect for beginners and previous vapers looking for a simple and sleek design. The Innokin ENDURA T18 delivers a superior experience in a compact, durable and affordable all in one starter kit. Crafted with top quality materials, the Innokin ENDURA is a 1 button, easy to fill & easy to use affordable advanced personal vaporizer that is durable, compact and stylish.

Optimized at 14 Watts with 1.5ohm replaceable coils, the ENDURA delivers a perfect vaping experience every time. The Prism T18 2.5ml Tank has a glass and stainless steel construction which is top-filled for quick and clean refills and the Japanese organic cotton wicking material delivers maximum flavor from your favorite eliquids.

Advanced integrated safety protections guard against overheating and over discharge and greatly improve charging safety and overall reliability. With 1000mAh of real battery capacity, the ENDURA can be conveniently charged via standard Micro USB cable and features Innokin’s ‘Vape While Charging’ technology for a daily vaporizer that you can rely on.

The Innokin ENDURA T18 Starter Kit is an all in one vaporizer solution that is beautifully packaged and includes the ENDURA battery, Prism T18 Tank, Replacement Coil, Micro USB cord, and Vape Stand.

For optimal performance and best results, a mouth to lung inhale is recommended with this device. The Endura is not designed for full lung inhalation vaping. The Endura is designed to simulate a cigarette or cigar draw; for best results, a relaxed puff is recommended. After filling the T18 tank with eliquid you should wait 5 minutes before vaping. Please do not overfill, or prime the coil via the middle airflow hole, as leaking or gurgling may occur.

We hope you enjoy vaping with the Endura T18.

Features and Specs:

• Dimensions: 7-3/4" x 3/4"
• 510 Threaded
• 1000 mAh Battery Capacity
• Glass and Stainless Steel Tank
• 24.5mm Diameter
• Top Fill Twist Design
• Prism Airflow Technology
• Minimum Resistance: 1.2 Ohm
• 100% Organic Cotton Coil
• 2.5mL E-Liquid Capacity
• Matching Delrin Drip Tip
• Maximum output Wattage: 14W
• Maximum output Current: 3.5A
• Maximum output Voltage: 5.5V

Replacement Coils Can be found here.

Please note: Our kits do not included eliquid. Eliquid must be purchased separately in order to use this device.

1 x Innokin Endura T18 Battery1 x Prism T18 Tank1 x Micro USB Cable2 x T18 1.5ohm Replacement Atomizer Heads1 x Vape Stand1 x Set of Spare O-rings1 x User Manual

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Battery Safety Warning: Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. Do not modify batteries or chargers in any shape or form. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire. Store your batteries away from the sun and heat to prevent overheating your batteries. Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V. myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.