Innokin Ares RTA by Phil Busardo and Dimitris Agrafiotis

Innokin Ares RTA by Phil Busardo and Dimitris Agrafiotis - Rebuildable Tank Atomizer for MTL Vaping
Platform Series

From the manufacturer:

The Innokin Ares RTA is a collaboration between Phil Busardo, Dimitris Agrafiotis, and Innokin. The goal was to create an affordable mouth to lung rebuildable tank atomizer (RTA) that was easy to build, easy to work with, easy to fill and provided an outstanding vape for the mouth to lung (MTL) crowd. The Ares RTA delivers incredibly delicious clouds of flavors! It features a top side filling system, a drop-in coil sky build deck, a liquid barrier to help minimize leaking and seepage and a user adjustable airflow with numerous settings.

The airflow has been designed with the MTL style of vaping in mind giving the user the ability to adjust the airflow from a tight style draw to a slightly more open draw. The air will then travel to the diffuser which will distribute the air over the coil. The air will travel to the top of the bell to the reduced chimney designed for flavor and throat hit for those who crave it. The entire system and rounded bell is designed to make filling a little easier and to reduce air turbulence for a smooth, quiet, satisfying vape.

The Innokin Ares RTA comes with everything required to get you started including a spare glass tank section, two mouthpieces, spare build screws, two coil building tools (Phil’s is much better than Dimitris’), loose wire, prebuilt coils, multi-colored o-rings, and natural organic Japanese cotton for wicking.

There is also a QR code on the box that will direct you to tutorial videos that will help you work with and build the tank. We truly hope you enjoy the Ares RTA!

Quick Links:
Our Premium e-Liquid
Wick, Wire and Tools

Features and Specs:

• Designed in Collaboration with Phil Busardo and Dimitris Agrafiotis the VapinGreek
• Designed for Mouth to Lung (MTL)
• Dimensions: 2-5/16" x 15/16" (Including Drip Tip and Threads)
• Diameter: 24mm
• 510 Threaded
• 4.0ml e-Liquid Capacity
• Drop-in Coil Sky Build Deck for Single Coil Builds
• Top Fill Design with Slide Out Fill Hole
• Liquid Barrier to Minimize Leaks
• Rounded Bell Chamber to Reduce Air Turbulence
• Adjustable Single Airflow Slot and Single Airflow Hole
• Four Different Sized Airflow Holes
• Includes Phil's Build Tool and Dimitris' Build Tool
• Includes Two Different Delrin Drip Tips
• 510 Drip Tip Compatible
  

---

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

---

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeteror knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

---

1 x Innokin Ares RTA
1 x Smoked Replacement Glass
1 x Delrin Curved Drip Tip
1 x Phil's Build Tool
1 x Dimitris' Build Tool
1 x Japanese Organic Cotton Pad
2 x Prebuilt Kanthal 1.0ohm Coil
1 x Loose 26g Kanthal Wire
1 x Dual Use Screwdriver
1 x Set of Spare O-Rings and Screws

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Battery Safety Warning: Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. Do not modify batteries or chargers in any shape or form. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire. Store your batteries away from the sun and heat to prevent overheating your batteries. Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V. myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.