Pioneer4you IPV Velas 120W TC Box Mod - Yellow

Pioneer4you IPV Velas YiHi SX410 120W TC Box Mod
YiHi SX410 Chip

The Pioneer4you IPV Velas utilizes the powerful YiHi SX410 chip. This device is designed for the power user looking for the next step in vaping without sacrificing aesthetics. The IPV Velas features a seven color LED strip which lights up when the button is pressed even when the device is powered off. The Velas can fire up to 120 watts and also supports advanced temperature control functionality that supports Nickel, Titanium, and Stainless Steel wire. Featuring the new SXi-Q control system, your vaping experience can be fully customized.

This device features the SXi-Q control system which allows for a fully customizable vaping experience. The IPV Velas features various different settings such as Powerful, Standard, Soft, Eco and SXi-Q modes for a wide variety of vaping experiences. The Velas requires (2) high amp 18650 batteries (sold separately) which can be easily replaced using the removable back battery door cover. The Velas has a micro USB port for charging. However, we recommend an external battery charger (sold separately) for optimal charging. The Velas is a powerful device that is easily adjustable to your own personal settings and allows for an incredible vaping experience.

Please note, due to the design of the device, this device is only compatible with 25mm tanks or smaller. 26mm and larger tanks are NOT compatible and will not fit the Velas. Certain tanks may not fit properly if a part of the tank juts out such as the airflow valve or top cap. If you are unsure if your tank fits, feel free to contact us and we will confirm if your tank is compatible or not.

Features and Specs:

• Dimensions: 4" x 1-9/16" x 1-1/2"
• Only Compatible with 25mm in Diameter and Smaller Tanks
• 510 Threaded
• Seven Color LED Strips
• Powered by the YiHi SX410 Chip
• Temperature Control Variable Joules: Ni200(Nickel) / Ti(Titanium) / SS316(Stainless Steel) / TCR
• Output Wattage: 10.0 - 120.0W
• Output Joule: 10J - 120J and 212 - 572 F / 100 - 300C
• Resistance: 0.05ohm - 1.5ohm (Joule Mode)
• Resistance: 0.15ohm - 3.0ohm (Power Mode)
• SX-iQ Control System
• Powerful, Standard, Soft, Eco and SXi-Q
• Visual Operating System
• Requires (2) High Amp 18650 Batteries (Sold Separately)
• **All batteries must be the same brand and model. Discharge and recharge the batteries together for maximum efficiency**
• **We recommend an external charger for optimal charging**
• Micro USB Port for Charging
• Reverse Polarity Protection
• Low Resistance Protection
• Low Battery Voltage Protection

Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.

---

1 x Pioneer4you IPV Velas 120W TC Box Mod
1 x Micro USB Cable
1 x Set of Stickers

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Battery Safety Warning: Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. Do not modify batteries or chargers in any shape or form. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire. Store your batteries away from the sun and heat to prevent overheating your batteries. Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V. myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.