Coil Master DIY Kit V3

Coil Master DIY Kit V3

Everything you need to wrap coils are organized well in our Coil Master DIY Kit V3. With the Coil Master DIY Kit V3, you can wrap coils and vape anywhere!!

Includes the Coil Master Coiling Kit and 521 Mini Tab

• 1 x Diagonal Pliers
• 1 x Needle-Nose Pliers
• 1 x Stainless Steel Folding Scissors
• 1 x Pen Styled Cross Screwdriver
• 1 x Pen Styled Straight Screwdriver
• 1 x Ceramic Tweezer (T1) so you can fire your coils while squeezing
• 1 x Elbow Tweezer (T3) to make all your adjustments
• 1 x Silicon Rubber Case for Jigs
• 1 x 24ga Kanthal A1 Wire Spool - 10ft (New in Version 3)
• 1 x Coil Master 521 Mini Tab (Requires (1) High Amp 18650 Battery Sold Separately) (New in Version 3)
• 1 x Coiling Kit V4 (New in Version 3)
• 1 x T Styled Hex Screwdriver (1.25mm, 1.5mm, 2.0mm) (New in Version 3)
• 1 x Japanese Organic Cotton (New in Version 3)

Other Coil Master Products

---

Important Note:

Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

1 x Diagonal pliers1 x Needle-nose pliers1 x Stainless steel folding scissors1 x Pen styled cross Screwdriver1 x Pen styled straight Screwdriver1 x Ceramic Tweezer (T1) 1 x Elbow Tweezer (T3) 1 x Kanthal Wire1 x 521 Mini Tab1 x Coiling Kit V41 x Silicon rubber case1 x Japanese Organic Cotton1 x T Styled Hex Screwdriver

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Battery Safety Warning: Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. Do not modify batteries or chargers in any shape or form. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire. Store your batteries away from the sun and heat to prevent overheating your batteries. Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V. myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.